Audio system – Acura 2008 RDX - Owner's Manual User Manual
Page 210
You will see ‘‘FOLDER REPEAT’’ on
the audio control display. To turn off
this feature, select folder repeat,
then press ENTER again.
This feature,
when activated, replays all the files
on the selected folder in the order
they are compressed in MP3/WMA.
To activate folder repeat, press the
AUDIO button to view the display,
then push down the selector on the
interface dial. Rotate the interface
dial to select folder repeat. Press
ENTER on the selector to enter your
selection.
The scan function samples
all the tracks/files (in MP3/WMA
mode) of the current disc/folder in
the order they are recorded on the
CD. To activate this feature, press
and release the SCAN button. You
will also see ‘‘SCAN’’ and the track/
file number blinking on the upper
display. To hear the rest of the
track/file, press and hold the SCAN
button for more than 2 seconds. If
you don’t, the system advances to
the next tracks/files, plays about 10
seconds of it, and continues through
the rest of the track/file the same
way. When the system finishes
scanning all the tracks/files in the
current disc, the system returns to
the track/file it first started scanning
with, scan is canceled, and the
system begins to play that track/file
normally.
To activate scan feature on the audio
control display, press the AUDIO
button to view the display. Push
down the selector on the interface
dial, then push the selector to the
left. You will see ‘‘SCAN’’ next to the
TRACK icon on the audio control
display. To turn off this feature, push
the selector to the left again within
10 seconds.
In MP3/WMA mode
FOLDER REPEAT
SCAN
Audio System
206
SCAN INDICATOR
TRACK SCAN ICON
FOLDER REPEAT INDICATOR
FOLDER REPEAT ICON
2008 RDX
Table Of Contents
Main Menu