Acura 2008 RDX - Owner's Manual - Manual (Page 219)

The scan function gives
you a sampling of all channels while
in the channel mode. In the category
mode, only the channels within that
category are scanned. To activate
scan, press the SCAN button. The
system plays each channel in
numerical order for a few seconds,
then selects the next channel. When
you hear a channel you want to
continue listening to, press the
button again.
You can store up to 12
preset channels using the preset
buttons/icons. Each button/icon
stores one channel from the XM1
band and one channel from the XM2
band.
To store a channel:
You can also scan the channels on
the audio control display. Press the
AUDIO button to view the display,
then push down the selector on the
interface dial. Push the selector to
the right to activate scan feature.
In category mode, only channels
within that category can be selected.
In channel mode, all channels can be
selected.
Use the tune, seek, or scan
function to tune to a desired
channel.
Press the button. To view
the audio control display, press the
AUDIO button. Either XM1 or XM
2 will be shown on the display.
1.
2.
CONTINUED
Audio System
SCAN Preset
Fe
a
tu
re
s
215
SCAN ICON
SCAN INDICATOR
2008 RDX
Table Of Contents Main Menu