Acura 2008 RDX - Owner's Manual - Manual (Page 197)

The SEEK function
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press the
or side of the
SEEK/SKIP bar, then release it.
The SCAN function
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. You will see ‘‘SCAN’’
on the upper display.
To activate the scan function with
the interface dial, press the AUDIO
button to view the audio control
display, then push down the selector
on the interface dial, and push the
selector to the right. You will see
‘‘SCAN’’ on the audio control display.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 10 seconds. If you do
nothing, the system will then scan
for the next strong station and play it
for 10 seconds. When it plays a
station that you want to listen to,
press the SCAN button again, or
push the interface selector to the
right again.
To activate the seek function with
the interface dial, press the AUDIO
button to view the audio control
display, then push the selector on
the interface dial to the right or left.
CONTINUED
SEEK SCAN
Audio System
Fe
a
tu
re
s
193
SEEK ICONS
SCAN INDICATOR
SCAN ICON
2008 RDX
Table Of Contents Main Menu