A&D Weighing FC-500Si User Manual
Page 69
13-3. OP-03 2 Ch. RS-232C
Multiple RS-232C interfaces expanding your counting applications are obtained by
installing OP-03.
OP-03 Installation
Standard RS-232C
1. Disconnect the AC adapter from the scale.
2. Remove the two screws and panel
covering the OP-03/04 slot.
3. Connect the connector in the scale to the
OP-03 unit.
OP-03/04 slot
4. Secure the OP-03 unit using the screws
removed in the step 2 above.
Ch. 2
Specifications are same as the standard
RS-232C interface and refer to “
12.
RS-232C SERIAL INTERFACE”.
Ch. 1
67