A&D Weighing FC-500Si - Manual (Page 14)

3-2. To Start Counting
1. Press the STANDBY/OPERATE key to turn the scale on when displaying the standby
indicator. Or press the RESET key to clear
any previous operations.
2. Three LED’s on the UNIT WEIGHT BY keys
will blink. This is to prompt you to select a
method for entering a unit weight for operation.
3.
S elect one of the ways to enter or recall the unit weight (the weight of one item of
what you are counting), and refer to the section noted for more instructions.
STABL
. 888881 0
881
pcs
W 2 W E I G H T ( k g )
1213456789 0.000
2 3 A S A M P U W ( g )
12341567 0.00000 4567890123456
7
TARE
ENTERED ZERO M+ SCALE TOTAL
UNIT WEIGHT BY
KEY-
BOARD
You can return to this point at any time during
operation by pressing the RESET key.
(This doesn’t clear the entered tare weight
and M+ memory.)
RESET
SAMPLE ID.
By using a sample: Section “
3-3. Unit Weight By Samples”
‰ 10 sample size
‰ 5, 25, 50 or 100 sample size
‰ Desired sample size
‰ Desired sample size not to use the
SAMPLE key
By using the l0-key pad: Section
“3-4.Unit Weight By KEYBOARD”
By stored lD number: Section“
3-5.Unit Weight By ID Number”
12