A&D Weighing FC-500Si - Manual (Page 40)

F-02-X ACAI Operation & Min. Unit Weight
‰ ACAI Mode When Unit Weight Entered by Sample Pieces.
0
ACAI is disabled.
1
3 ACAI automatic operation.
2
ACAI manual mode (using the ENTER key).
‰ ACAI Mode When Unit Weight Entered by Keyboard or ID
0
ACAI is disabled.
1
3
ACAI manual mode (using the ENTER key). This setting
works when f-02-01 setting is not “0”.
2
ACAI automatic obeys f-02-01 setting.
‰ Minimum Unit Weight. (1d=1 weighing display division)
The factory setting may be different for some countries.
0
1/5 d (FC-i series), 1/20 d (FC-Si series)
1
3 1/100 d (FC-i series), 1/400 d (FC-Si series)
F-03-X M+ Accumulation Function
‰ M+ Accumulation – Automatic or Manual
0
3 Manual accumulation (by pressing the M+ key).
1
Automatic accumulation (Positive data only).
‰ + or – Count Data Acceptable. (Manual Accumulation)
0
3 Positive data only (5d and above).
1
Positive and negative data (5d and above or –5d or below).
f-02-01
f-02-02
f-02-03
f-03-01
f-03-02
+5d
M+
Not Accepted
f-03-02=0
+
0
-
+5d
-5d
M+
Not Accepted
f-03-02=1
+
0
-
38