Kofax Ascen 7.5 Release Script for Hummingbird DM 6.0 User Manual

Page 29

Ascent® 7.5 Release Script for Hummingbird DM 6.0 Release Notes

Kofax, Inc.

Figure 3. DM Login Information Dialog Box

The Library Name combo box lists the default primary library and all available remote

and independent libraries. If this is the first time you are logging on to the Hummingbird

DM release script, then this setting defaults to the primary library. Notice that the library

name you choose will display in the title bar of the Ascent 7.5 Release Script for

Hummingbird DM 6.0 — Release Setup dialog box, as shown in Refer to Figure 4 on

Note

The login information will be saved and used during release.

To prompt for a user ID and password if the release script is not able to log in to DM at

release time, select the “If unable to log in during release, prompt for valid login

information” check box.

If selected and there is a problem logging on to DM during release, the DM Login

Information dialog box will display and the library name will be disabled. The user

may then enter valid login data and click OK. However, if the user clicks Cancel, the

release will fail and the batch will be routed to the Ascent Capture Quality Control

module.

If not selected and problems occur when logging on to the Hummingbird DM release

script, the DM Login Information dialog box will not display during release. Release

will fail and the batch will be routed to the Ascent Capture Quality Control module.

Note

Do not select this feature if you plan to run the Ascent Capture Release module as a

service or if you plan to run the Release module during off-hours. The DM Login

Information dialog box requires a user response, which interferes with the automated

nature of running the Release module as a service or without operator attention.

Click OK. The Ascent 7.5 Release Script for Hummingbird DM 6.0 — Release Setup dialog