General settings tab, Server timing (in seconds) – Kofax Ascent Captur User Manual
Page 20

Ascent Capture for IBM ImagePlus/400 WAF Release Notes
16
Kofax, Inc.
General Settings Tab
The General Settings tab is used to define general options for the current document class.
Figure 5. General Settings Tab
Drive Remap
This field is used to map the DASD System ID to the IBM network drive or directory assigned on
the Release workstation (for example, Q: or \\AS400NAME\QDLS). It must match the drive
assignment specified in Client Access. If this field is left blank, the drive letter assigned on the
Release workstation is used as the DASD System ID.
Working Directory
This field is the temporary storage location will use to store document images during release
processing.
Browse
This button is used to locate a directory to be used as the Working Directory.
Server Timing (in seconds)
Start Allowance
This field is used to define the number of seconds to allow the IBM server program to start before
timing out. The value can be increased to allow more wait time on heavily loaded networks or
slower networks. Increasing the value may decrease overall release performance. Valid entries are
from 1 through 60.