KEYENCE CA-LM0307 - Manual

1
Telecentric Macro Lens
CA-LM0307
Precautions
This caution sheet describes the precautionary points for using the Telecentric Macro Lens CA-LM0307.
Read this caution sheet before using the product in order to achieve maximum performance.
Keep this caution sheet in a safe place after reading it so that it can be used at any time.
„ Symbols
This caution sheet uses the following symbols so that you can recognize important messages at aglance.
Please read it in its entirety.
.
Fixing points of the Main Unit
Fix to the surrounding hatching points using the Telecentric Macro Lens dedicated mounting stand or a stand with a
similar structure.
Introduction
It indicates a situation which, if not avoided, could result in product damage as well
as property damage.
Precautions Concerning Installation
• When installing this device, always secure the Lens Main Unit side at the specified
points (surrounding 2 points) using the Telecentric Macro Lens dedicated
mounting stand (OP-87524: optional) or a stand with a similar structure.
• If secured at one spot on the Lens Main Unit side or Camera side only, due to falling etc., an
accident or malfunction may occur and may be the cause of damage. Please do not do so.
• This device is a precision device, take preventative measures in an environment
where vibration or shock will contact the device. If an environment where vibration
and shock contacting the device continues, it may cause malfunction or damage.
• Use such things as an insulating base when installing the equipment. Ensure that the
equipment insulation is secured. Since the Lens and the Camera are case grounded,
when there is a difference in potential or there is noise and when installed directly
without secured insulation, it may be the cause of device damage or incorrect operation.
• For fixing the Lens Main Unit, do so using the 2 points specified below. If it is fixed using points
other than those specified, it may cause damage to the Main Unit or interfere with operation.
NOTICE
NOTICE
ш30
ш39.8
ш40
29.1
17.526 131.7
116.8
113.2
50
2-M2
ш48
ш41.8 ш40.6
M37.5×0.5
3.5 C-Mount
96M11940