beautypg.com

Specifications, Outer dimensions, Warranties and disclaimers – KEYENCE CA-HX500M User Manual

Page 2: Buyer's transfer obligations

background image

Specifications

* The 16x speed reading is supported when transferring data to an XG-8000 Series unit

with the XG-EC80L/CA-EC80L/CA-EC80HX equipped or when transferring data to a

CV-X200 Series unit with the CA-EC80L/CA-EC80HX equipped.

For details, see the user's manual of the supported controller that you are using.

Outer Dimensions

CA-HX500C/CA-HX500M

When the plastic part is mounted (factory default)

When the plastic part is not mounted

WARRANTIES AND DISCLAIMERS

(1) KEYENCE warrants the Products to be free of defects in materials and

workmanship for a period of one (1) year from the date of shipment. If any
models or samples were shown to Buyer, such models or samples were
used merely to illustrate the general type and quality of the Products and
not to represent that the Products would necessarily conform to said
models or samples. Any Products found to be defective must be shipped to
KEYENCE with all shipping costs paid by Buyer or offered to KEYENCE
for inspection and examination. Upon examination by KEYENCE,
KEYENCE, at its sole option, will refund the purchase price of, or repair or
replace at no charge any Products found to be defective. This warranty
does not apply to any defects resulting from any action of Buyer, including
but not limited to improper installation, improper interfacing, improper
repair, unauthorized modification, misapplication and mishandling, such as
exposure to excessive current, heat, coldness, moisture, vibration or
outdoors air. Components which wear are not warranted.

(2) KEYENCE is pleased to offer suggestions on the use of its various

Products. They are only suggestions, and it is Buyer's responsibility to
ascertain the fitness of the Products for Buyer’s intended use. KEYENCE
will not be responsible for any damages that may result from the use of the
Products.

(3) The Products and any samples ("Products/Samples") supplied to Buyer are

not to be used internally in humans, for human transportation, as safety
devices or fail-safe systems, unless their written specifications state
otherwise. Should any Products/Samples be used in such a manner or
misused in any way, KEYENCE assumes no responsibility, and additionally
Buyer will indemnify KEYENCE and hold KEYENCE harmless from any
liability or damage whatsoever arising out of any misuse of the Products/
Samples.

(4)

OTHER THAN AS STATED HEREIN, THE PRODUCTS/SAMPLES ARE

PROVIDED WITH NO OTHER WARRANTIES WHATSOEVER. ALL
EXPRESS, IMPLIED, AND STATUTORY WARRANTIES, INCLUDING,
WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT
OF PROPRIETARY RIGHTS, ARE EXPRESSLY DISCLAIMED.
IN NO EVENT SHALL KEYENCE AND ITS AFFILIATED ENTITIES BE
LIABLE TO ANY PERSON OR ENTITY FOR ANY DIRECT, INDIRECT,
INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES
(INCLUDING, WITHOUT LIMITATION, ANY DAMAGES RESULTING
FROM LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF
INFORMATION, LOSS OR INACCURACY OF DATA, LOSS OF
PROFITS, LOSS OF SAVINGS, THE COST OF PROCUREMENT OF
SUBSTITUTED GOODS, SERVICES OR TECHNOLOGIES, OR FOR
ANY MATTER ARISING OUT OF OR IN CONNECTION WITH THE USE
OR INABILITY TO USE THE PRODUCTS, EVEN IF KEYENCE OR ONE
OF ITS AFFILIATED ENTITIES WAS ADVISED OF A POSSIBLE THIRD
PARTY’S CLAIM FOR DAMAGES OR ANY OTHER CLAIM AGAINST
BUYER.
In some jurisdictions, some of the foregoing warranty disclaimers
or damage limitations may not apply.

BUYER'S TRANSFER OBLIGATIONS:

If the Products/Samples purchased by Buyer are to be resold or delivered
to a third party, Buyer must provide such third party with a copy of this
document, all specifications, manuals, catalogs, leaflets and written
information provided to Buyer pertaining to the Products/Samples.

E 1101-3

Product

16x speed color

5-megapixel camera

16x speed monochrome

5-megapixel camera

Model

CA-HX500C

CA-HX500M

Image receiving

element

Color CMOS image receiving

element

Square-lattice all-pixel

11/16x* speed reading

Monochrome CMOS image

receiving element

Square-lattice all-pixel

11/16x* speed reading

Unit cell size

5.0

m x 5.0 m

Image size

Equivalent to 1-inch

Number of effective

pixels

In 5-megapixel mode: 2432(H) × 2040(V),

In 2-megapixel mode: 1600(H) × 1200(V)

Scanning system

Progressive

At 11× speed:

In 5-megapixel mode: 50.3 ms (monochrome), 52.4 ms (color)

In 2-megapixel mode: 20.1 ms (monochrome), 20.2 ms (color)

At 16x speed:

In 5-megapixel mode: 27.6 ms (monochrome), 29.0 ms (color)

In 2-megapixel mode: 11.6 ms

Pixel transfer frequency

130 MHz (11x)/195 MHz (16x)*

Transfer system

Digital serial transfer

Electronic shutter

1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000,

1/5000, 1/10000, 1/20000

Can specify from 0.01 to 100 ms through numerical value input

Lens mount

C mount

En

vir

onm

en

tal

re

sista

nc

e Ambient operating

temperature

0 to +40°C

Ambient operating

humidity

35 to 85% RH (No condensation)

Weight

Approx. 280 g (not including lens)

1000

100

10

1

10000

1000

100

10

Y

: Y field of vie

w (mm)

WD: Working distance (mm)

(1) CA-LHE12

(2) CA-LHE16

(3) CA-LHE25

(4) CA-LHE35

(5) CA-LHE50

(1) (2)

(3)

(4) (5)

* If an Extension tube is used, the peripheral resolution may deteriorate.

When using the high-resolution lens (CA-LHE*) [1”: (2432 x 2040)]

0.5

1.5

1.5

10

10

20

1.0

0.5

5

5

5

1/4-20UNC
Depth: 6 max.

4 x M4
Depth: 5max.

10.0

50.3

12.25

20.15

29.0

10.4

30.0

49.6

(85.0)

Depth: 4 max.

4 x M3

φ7.2

Depth: 4 max.

16 x M3

52.0

9.5

22.0

25.0

12.7

31.4

31.0

41.0

33.3

40.3

33.3

40.3

25.0

φ36.0

5.0

22.0

9.5

52.0

Copyright (c) 2014 KEYENCE CORPORATION. All rights reserved.

13067E 1074-1 96M13067 Printed in Japan

This manual is related to the following products: