Holtgreven GSE-665 - Manual (Page 45)

37
6 C
HAPTER
6: A
DDITIONAL
O
PERATING
M
ODES
We have taken popular application files and incorporated them into the
firmware in an easy to use menu format. Use the arrow keys to scroll
through the choices or the [SELECT] key on the Model 460 and press
[ENTER] to setup the chosen application file. An explanation of each
application file can be found at the bottom of the display on the LCD models
only. With 5 different display choices available on the 60 series instruments,
menu selections may vary in appearance. Operator prompts will also vary
with display type.
P
IECE
W
EIGHT
D
ATABASE
M
ODE
– APW
L
OOKUP
A specific average piece weight may be recalled from a database. The
average piece weight will be associated with an ID#.
S TORE APW – S TORE A SPECIFIC APW TO THE DATABASE –
M UST P ERFORM A SAMPLE BEFORE USING .
1. To store an average piece weight, Press [SELECT] until APW is
displayed. Key in the average piece weight and press [ENTER].
2. From the gross weight, press [F1]. Prompt = “Key In ID”.
3. Key-in the desired ID number.
4. Press
[ENTER]. Prompt = “store new#?”.
5. Press [ENTER] to store the ID. Or [CLR] to abort.
6. Add sample parts (default value = 10) to the scale.
7. Press
[ENTER] to store APW.
[CLR] will abort the process.
G
ET
APW – R
ETRIEVE A SPECIFIC
APW
FROM THE DATABASE
1. Press [F1]. Prompt = “Key In ID”.
2. Key in the ID number. If the ID# exists, “Found ID#” will be
displayed briefly and then ID#.
3. The display will return to the QTY mode. Press [ENTER] to accept
entry.
4. The piece weight register is updated with the associated value.