FRITSCH PULVERISETTE 14 - Manual (Page 7)

2 Safety information and use
2.1 Requirements for the user
This operating manual is intended for persons assigned with operating
and monitoring the Fritsch of the PULVERISETTE 14. The operating
manual and especially its safety instructions are to be observed by all
persons working on or with this device. In addition, the applicable rules
and regulations for accident prevention at the installation site are to be
observed. Always keep the operating manual at the installation site of
the of the PULVERISETTE 14.
People with health problems or under the influence of medication,
drugs, alcohol or exhaustion must not operate this device.
The of the PULVERISETTE 14 may only be operated by authorised per-
sons and serviced or repaired by trained specialists. All commissioning,
maintenance and repair work may only be carried out by technically
qualified personnel. Qualified personnel are persons who, because of
their education, experience and training as well as their knowledge of
relevant standards, regulations, accident prevention guidelines and oper-
ating conditions, are authorised by those responsible for the safety of
the machine to carry out the required work and are able to recognize
and avoid possible hazards as defined for skilled workers in IEC 364.
In order to prevent hazards to users, follow the instructions in this
manual.
Malfunctions that impair the safety of persons, the of the PULVERISETTE
14 or other material property must be rectified immediately. The fol-
lowing information serves both the personal safety of operating per-
sonnel as well as the safety of the products described and any devices
connected to them: All maintenance and repair work may only be per-
formed by technically qualified personnel.
This operating manual is not a complete technical description. Only the
details required for operation and maintaining usability are described.
Fritsch has prepared and reviewed this operating manual with the
greatest care. However, no guarantee is made for its completeness or
accuracy.
Subject to technical modifications.
2.2 Scope of application
NOTICE!
The PULVERISETTE 14 has been built according to the state
of the art and in accordance with recognized safety rules.
During operation, however, hazards can arise for users or
third parties and damage to the machine or other material
property can occur.
Safety information and use
- 7 -