4 setting up, 5 ambient conditions, 4 setting up 4.5 ambient conditions – FRITSCH PULVERISETTE 14 User Manual
Page 20: Installation
4.4 Setting up
DANGER!
Do not step under the transport pallet during transport.
WARNING!
Crushing hazard!
Always lift with 2 persons.
Hold the bottom edge of the housing when lifting.
NOTICE!
Never operate of the PULVERISETTE 14 while it is standing
on the transport pallet!
NOTICE!
Keep the air outlet on the side ventilation grate free. Risk of
overheating!
Place the PULVERISETTE 14 on a flat, stable surface. It does not have to
be fastened to this surface. The rubber feet on the PULVERISETTE 14 can
be adjusted to compensate for uneven surfaces.
n
Make sure that the PULVERISETTE 14 is easily accessible. There has
to be sufficient space to reach the main switch on the back of the
device.
4.5 Ambient conditions
WARNING!
Mains voltage!
– The device may only be operated indoors.
– The surrounding air may not carry any electrically con-
ductive dust.
– Maximum relative humidity 80% for temperatures up
to 31°C, linearly decreasing down to 50% relative
humidity at 40°C.
n
The room temperature has to stay between 5 - 40°C.
n
Altitudes up to 2000 m
n
Degree of pollution 2 according to IEC 664.
Installation
- 20 -