FRITSCH PULVERISETTE 14 - Manual (Page 30)

6.6 Milling with conversion kit for larger quantities
For the article numbers, please refer to our homepage or the spare parts
catalogue.
The conversion kit for comminution of larger amounts consists of:
The conversion kit for comminution of larger amounts consists of:
n Collecting vessel with outlet
n Clamping ring with bent tube
n Nylon support sack
n Paper filter sack
We recommend using the conversion kit:
n when milling larger quantities.
Due to the centrifugal effect of the impact rotor and the increased
air flow rate, the source material is discharged and collected in the
filter sack.
n when milling temperature-sensitive source material.
The increased air flow rate cools the source material. This shortens
the milling time and also the amount of time the material spends in
the grinding chamber.
1. Use a cross-head screwdriver to unscrew the cover plate on the
left side of the housing cover.
2. Remove the cover screws in the lower part of the housing.
Conversion
Using the device
- 30 -