FRITSCH PULVERISETTE 14 - Manual (Page 13)

Designation Explanation
References to sections in this manual and rele-
vant documentation
Lists without a specific order
[Button] Operating elements (e.g. push button, switch),
display elements (e.g. signal lamps)
‘Display’ Screen elements (e.g. buttons, function key
assignment)
2.5 Device safety information
n Only use original accessories and original spare parts. Failure to
observe this instruction can compromise the safety of the machine.
n Accident-proof conduct is to be strictly followed during all work.
n Comply with all currently applicable national and international acci-
dent prevention guidelines.
CAUTION!
Wear hearing protection!
If a noise level of 85 dB(A) is reached or exceeded, ear pro-
tection should be worn to prevent hearing damage.
WARNING!
The maximum accepted concentration (MAC) levels of the
relevant safety guidelines must be observed; if necessary,
ventilation must be provided or the machine must be oper-
ated under an extractor hood.
DANGER!
Explosion hazard!
– When Grinding oxidizable substances, e.g. metals or
coal, there is a risk of spontaneous combustion (dust
explosion) if the share of fine particles exceeds a cer-
tain percentage. When Grinding these kinds of sub-
stances, special safety measures must be taken and the
work must be supervised from a specialist.
– The PULVERISETTE 14 is not explosion protected and is
not designed to grind explosive materials.
n Do not remove the information signs.
Please observe!
Safety information and use
- 13 -