Doepfer R2M Midi-Ribbon-Controller - Manual (Page 8)

Page 8 R2M User's Guide V1.11
Fundamental operation notes
• R2M contains a lot of parameters that can be adjusted by the user and stored in
16 presets. Similar parameters are collected in the same menu.
• A menu is activated by pressing the corresponding menu button. The active menu
is indicated by an illuminated LED.
• Repeated pressing of the same menu button leads to the next parameter that can
be displayed and adjusted in this menu. The process is circular, i.e. after the last
parameter the first parameter of this menu appears again.
• To exit a menu another menu button has to be pressed.
Fig. 4 shows the information that is displayed in the LCD.
Fig. 4
a number of parameters available in the currently selected menu
b name of the menu
c the sensor resp. the CV output that refers to the currently selected parameter (1
= position sensor, 2 = pressure sensor)
d number of the currently selected parameter
e name of the parameter
f current value of the parameter, that can be changed with the up/down buttons
4|Midi Param. [1]
4|Pitchscale: 63
a c b
e d
f