Cub Cadet CC 4BP 32cc - Manual (Page 23)

FUEL SYSTEM AND CARBURETOR
20
Repairing the fuel system
Remove the fuel tank:
CAUTION: Drain all fuel out of the blower before
attempting to work on the fuel system.
1. Disconnect the fuel lines from the carburetor or
at the line splices. See Figure 5.3.
2. Remove the screw that holds the fuel tank
bracket to engine cover. See Figure 5.4.
3. Remove the two screws holding the fuel tank
bracket to the blower housing. See Figure 5.5.
4. Remove the three screws that hold the tank to
the bracket. See Figure 5.6.
5. To install the fuel tank follow the steps previously
described in reverse order.
Figure 5.3
Line splices
Figure 5.4
Remove this screw
Figure 5.5
Remove these screws
Figure 5.6
Remove these screws