Ir speed dome operating manual, Timing action – COP-USA CD59NV-IRWP User Manual

Page 45

IR Speed Dome Operating Manual

•TIMING ACTION

TIMING ACTION allows the user to set up the actions of the
dome in 7 days (each day with 8 timing segments). When
fishing the setup, the dome will do the actions according to
the setup motion during the defined time segment.

NO.:

Here shows the day within a week. Move the cursor here and press

IRIS OPEN to enter. Move joystick up or down to select the Serial No. (1‐8)
for the timing action. Press IRIS OPEN to confirm.

START:

To set up the start time for the defined motion within this time

segment. Press IRIS OPEN to confirm.

STOP:

To set up the stop time for the defined motion within this time

segment. Press IRIS OPEN to confirm.

MOTION:

To setup the motion that will be operated in this time

segment. The motion includes: NONE. PRESET 1‐8, SCAN 1‐4, SEQUENCE
1‐4 and PATTERN 1‐4.

ON/OFF:

Move the cursor here and press IRIS OPEN to enter to enable

or disable this function. Press IRIS OPEN to confirm.

COPY:

The user could set up each 8 segment of 7 days separately or can

copy the finished setting for one day to the current day. Move the cursor
there and press IRIS OPEN to copy the settings.

BACK:

Press IRIS OPEN to save and be back to last menu.

NOTE:

It is not allowed to set up the same time segment during one day.

And the time segment can not exceed 00:00. During the timing action
segment, the defined action will be stopped if the user moves the dome.
If there is operation during the defined time segment, the action will
re‐activated as long as it is in the defined timing action segment.

MAIN MENU

LANGUAGE :ENGLISH

RESTART
FACTORY DEFAULTS

HELP
EXIT

MOTION

BACK EXIT

TIMING ACTION

NO. START STOP MITION

1 00:00 00:00 NONE
2 00:00 00:00 NONE
3 00:00 00:00 NONE
4 00:00 00:00 NONE
5 00:00 00:00 NONE
6 00:00 00:00 NONE
7 00:00 00:00 NONE
8 00:00 00:00 NONE

OFF MON COPY BACK