COP-USA CD59NV-IRWP - Manual (Page 41)

IR Speed Dome Operating Manual
40
•AUTO SCAN
The dome supports 8 groups of auto scan. Please check
the following steps to set up a scan.
1) SCAN NO.: Move the cursor here and press IRIS OPEN to enter the
setup of SCAN Number. Move the joystick to select a preset number
(1‐8) and press IRIS OPEN to confirm.
2) TITLE: Move the cursor here and press IRIS OPEN to enter the
setup of SCAN Title. Check the detailed above in DOME TITLE
settings.
3) : Move the cursor here and press IRIS OPEN to
enter. Move the dome to a defined position as left limit and press
IRIS OPEN to save this left boundary.
4) <RIGHT LIMIT>: Move the cursor here and press IRIS OPEN to
enter. Move the dome to a defined position as right limit and press
IRIS OPEN to save this right boundary.
5) START: Move the cursor here and press IRIS OPEN to start the
current scan.
6) SCAN SPEED: Move the cursor here and press IRIS OPEN to set up
the scan speed ranging 1‐30.
MAIN MENU
LANGUAGE :ENGLISH
RESTART
FACTORY DEFUALTS
HELP
EXIT
MOTION
BACK EXIT
SCAN
SCAN NO. :1
TITLE :SCAN 1
START
SCAN SPEED :20
BACK EXIT