COP-USA CD59NV-IRWP - Manual (Page 20)

IR Speed Dome Operating Manual
19
Two options for the
Dome Title and
Date/Time: OFF and
ON Other setup
selections include:
Move the cursor by joystick to the one you need to set, and press Iris
Open to enter the item. Move the joystick select the status and press Iris
Open to confirm.
Titles can be placed anywhere on the monitor. This feature
allows you to customize the window of your monitor screen. To
set a title position:
1) Use the joystick to position the cursor in the DISPLAY POSITION
2) Press Iris Open.
3) Use the joystick to move the title up, down, left, or right.
4) Press Iris Open.
5) Repeat steps 1 through 4 to position other titles
6) Position the cursor at BACK or EXIT. Press Iris Open to save settings and
exit menu.
•IR LED
The user can open and close the IR LED manually and set up
the IR LED work mode under this OSD mean. (Under normal
operation mode, the user can press IRIS OPEN and IRIS CLOSE to
adjust the IR LED power):
1) CONTROL MODE :
AUTO FUCTION Indicate the dwell time for auto function titles
ZONES Indicate the dwell time for zone titles
DATE/TIME Display the current date and time
PAN/TILT Time to display PTZ info and zoom info
ALARM Time to display alarm in/out info
IR LED INFO Time to display IR LED info
PROMPT Display prompt info
OFF Title will not be displayed when activated
ON Title will be continuously displayed when activated
2 SEC Title will be displayed for 2seconds after activation
5 SEC Title will be displayed for 5seconds after activation
10 SEC Title will be displayed for 5seconds after activation
AUTO IR LED will be opened or closed automatically according to the
light conditions.
IR LED SETTING
CONTROL MODE :AUTO
SENSITIVITY : 8
AUTO CONTROL :OFF
BACK EXIT
IR LED POWER
POWER MODE :USER
BACK EXIT
DOME SETTINGS
BACK EXIT
MAIN MENU
LANGUAGE :ENGLISH
INFORMATION>
RESTART
IR AUTO CONTROL
STANDBY POWER :60%
STANDBY DELAY :10 SEC
SENSITIVITY :MID
BACK EXIT
ADVANCED SET
ENHANCED MODE :STATIC
START TIME :18:00
STOP TIME :06:00
BACK EXIT