Checkline TT02 - Manual (Page 26)

Series TT02 Digital Torque Tool Testers User’s Guide
25
For available units, refer to the Units section. For available modes, refer to the Home Screen And
Controls section.
15.6 Information / Welcome Screen
The following screen is displayed at power-up and can be accessed at any time by selecting Information
from the menu:
16 SPECIFICATIONS
16.1 General
Accuracy: ±0.3% of full scale
Sampling rate: 7,000 Hz
Power: AC or rechargeable battery. Low battery indicator appears when battery level is low, and
tester powers off automatically when power reaches critical stage.
Battery life:
Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use
Measurement units: ozFin, lbFin, lbFft, Nm, Ncm
Outputs:
USB / RS-232: Configurable up to 115,200 baud.
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog: ±1 VCD, ±0.25% of full scale at capacity.
General purpose: Three open drain outputs, one input.
Set points: Three open drain lines.
Configurable
settings:
Digital filters, outputs, set points, break detection, first/second peak, automatic shutoff,
default units, default mode, passwords, key tones, audio alarms, backlight, calibration
Safe overload: 150% of full scale (display shows “OVER” at 110% and above)
Weight: 5.8 lb [2.6 kg]
Included accessories:
AC adapter, battery, USB cable, resource CD (USB driver, MESUR
TM
Lite software,
MESUR
TM
gauge DEMO software, and user’s guide), NIST-traceable certificate of
calibration
Warranty: 3 years (see individual statement for further details)
Digital Torque Tester
Series TT02
Model No: MTT02-50
Serial No: 1234567
Version: 1.0
(c) Mark-10 Corp.
INITIAL SETTINGS
Units
lbFin
Mode
Real Time