Checkline WTT-110 - Manual (Page 9)

– 9 –
9.10 Additional Operating Information
Low Battery
When battery charge is low, the LO BAT indicator will blink on and off in the
LCD Display indicating that the batteries need to be charged. Charging time
of fully depleted batteries is approximately 18 hours when the unit is off. The
adapter/charger automatically shuts off when the battery is at full charge to
protect the battery. The adapter/charger can be used to power the unit during
battery charging, but this will lengthen the charging time. Refer to Charging
the Battery, section 4, page 4, for additional information.
Auto Power Off
If the gauge is on and there is no activity for 10 minutes, the unit will automati-
cally power off to conserve battery charge. PWR appears above the display digits
to notify that there is 1 minute before power off. If the adapter/charger is power-
ing the gauge, auto power off function becomes inactive.
Temperature Compensation
The WTT-110 utilizes a built-in temperature compensation system to provide
optimum accuracy and to prevent signal drift. If the user would like to disable
this feature, please refer to the Advanced Settings section on page 10.
– 12 –
OFF
ZERO
Press and hold ZERO button. Press and release POWER button.
F01 0001
F01
— 0001
F01 0001
F02
3
F03
10
F04
2400
Plus or minus sign
PEAK
UNIT
Data was memorized
UNIT
UNIT
Plus
Minus
PEAK PEAK PEAK
Plus or minus sign
Display Update Auto power of
f
Baud rate of RS232C
F02
5
F02
10
UNIT
UNIT
F02
20
UNIT
F02
1
UNIT
F02
2
UNIT
F02
3
UNIT
UNIT
F03 OFF
F03
10
UNIT
UNIT
UNIT
UNIT
F04
4800
F04
9600
UNIT
F04
19200
UNIT
F04
2400
UNIT
UNIT
1. Press and hold the ZERO button. 2. Press and release the POWER button. 3. Each time the PEAK button is pressed, the FGE/V
-X will scroll through each of the functions.
4. Press the ZERO button to exit,
NOTE: In function 2, the numbers signify as follows: 1- 1 time/sec 2- 2 times/s 3- 3 times/sec 5- 5 times/sec 10- 10 times/sec 20- 20 times/sec
10.5 Flow Chart Illustrating the Steps Required To Change Advanced
Settings