Checkline WTT-110 - Manual (Page 2)

– 2 –
1 .0 I N T RODU CT I ON
Thank you for selecting the CHECK•LINE WTT-110 Wire Terminal Pull Tester for
your requirements. With correct use and proper care this product should provide
many years of precise and accurate testing. Please read the entire operation manual
thoroughly before using this instrument for the first time. The information contained
herein will help assist users to achieve accurate and repeatable results as well as
prevent damage with improper set-up or operation.
This instrument is designed for measuring tensile strength of soldered or solder-free
cable joints with end sleeves, pins, solder pins or similar wire terminal components
in the field of quality control or design validation.
Safety Precautions
Wear appropriate eye protection at all times.
The load cell can be damaged if the internal measuring system is overloaded.
Do not exceed the maximum measuring limit of 50 Kg (110 lbs. or 500N).
Transport and store the instrument with great care. This reduces the risk of
damage to the load cell or other minor mechanical problems which can result
in inaccurate measurement results.
Operate the instrument in appropriate environments only. The instrument
is equipped with a temperature compensation for a temperature range of
32 to 120 °F (0° to 40°C) and should be used in this temperature range only.
Do not expose this device to liquid or operate in high-humidity environments.
– 19 –
1 5 .0 Dim e nsions