Checkline FGS-100PX - Manual (Page 5)

5
4. Units of Measure: English or Metric
To switch from English to metric units, push the “Speed” and “RST” buttons while turning the power on.
To return to English units turn the stand off and push the “SPEED” and “Time/>” buttons while turning the
power back on.
AC Power cord and AC plug for the Force
gauge, located on the back of the rear of
the test stand.
To identify whether the stand is in metric or English units, turn the power on. (power switch is
located in the back of the unit), Metric units will show one decimal place (0.0), while English
units show two decimal places (0.00) To change to metric units, push “A/SPEED/B” and “RST/^”
switches while turning the power on. To change to English units, push “A/SPEED/B” and “TIME/<”
switches while turning the power on.
Emergency Stop button located on
the side of the front plate. Turn the
button Clockwise to release.
Caution warning holds important safety information.
REMINDER: holds important keep information for the product.