Cannon Instrument TESC - Manual (Page 14)

TESC Operator's Manual, Rev 1.0
8
Getting Started CANNON®
Table 5 — Packing list (accessories)
Description Part Number
Test cells (pkg of 12); 25 mm OD × 150 mm, rimless 9725-F84
Certificate of Calibration N/A
TESC Operator’s Manual 17.5125
USB flash drive with program files 17.5121
Setup the TESC System
The TESC System ships partially disassembled for ease of packaging. Basic assembly is simple,
quick, and requires only a few common tools.
Table 6 — Tools and materials required
Description Description
TESC base unit #2 Philips-head screwdriver
Brookfield® DV2T viscometer Mounting collar
Retaining ring Retaining screws (4)
MAINS AC power cable MAINS AC pass-through power cable
Assemble the TESC System
Assemble the TESC System on a secure, level surface. Refer to Figure 1 as necessary.
Note: If the TESC System is moved after assembly, you must level the
unit again.
1. With a #2 Philips-head screwdriver, securely mount the Brookfield® DV2T onto the
viscometer tray.
2. Level assembled unit by adjusting the screws in the feet of the TESC base unit.