Brookfield DV1 Viscometer - Manual (Page 6)

Brookfield Engineering Laboratories, Inc. Page 6 Manual No. M14-023
The equivalent units of measurement in the SI system are calculated using the following conversions:
SI CGS
Viscosity: 1 mPa•s = 1 cP
Torque: 1 Newton•m = 10 7 dyne•cm
References to viscosity throughout this manual are done in CGS units. The DV1 Viscometer provides
equivalent information in SI units.
I.1 Components
COMPONENT PART NUMBER QUANTITY
DV1 varies 1
Model G Laboratory Stand Model G 1
Spindle Set with Case* varies 1
DV1MLV set of four spindles (#61 through #64) SSL or SSLK †
DV1MRV set of six spindles (#02 through #07) SSR or SSRK †
DV1MHA/HB set of six spindles (#02 through #07) SSH or SSHK †
Shipping Cap* B-30-3Y 1
Power Cord (115V/230V) DVP-65/66 1
Guardleg* ( not supplied with HA/HB versions) varies 1
DV1MLV B-20Y or B20KY
†
DV1MRV B-21Y or B21KY †
Carrying Case DVE-106 1
Operating Manual M14-023 1
For cone/plate versions:
Spindle wrench CP-23 1
Cone spindle CPA-XXZ 1
Sample cup varies 1
Standard CPA-44YZ
With embedded temperature probe and cable CPA-44PYZ
The following applies to DV1 Viscometers with the temperature probe option. Look for the symbol
Tp throughout this manual for instructions pertaining specifically to DV1 Viscometers with
temperature probe option.
OPTIONAL ITEMS
RTD Temperature Probe DVP-94Y 1
Probe Clip DVE-50A 1
RTD Cable when supplied with Cone/Plate version SC4-61Y 1
Please check to be sure that you have received all components and that there is no damage. If you are
missing any parts, please notify Brookfield Engineering or your local Brookfield agent immediately.
Any shipping damage must be reported to the carrier.
* Not supplied with Cone/Plate version.
† “K” in the part number identifies EZ-Lock spindles.