Brookfield CAP1000 Viscometer - Manual (Page 6)

Brookfield Engineering Labs., Inc. Page 4 Manual No. M02-32A0607
The following optional items may have been included:
Part No.
7. Viscosity Standard Fluid for calibration See Table III-5 and III-6 in Section III.
Please check to be sure that you have received all components and that there is no damage.
If you are missing any parts, please notify Brookfield or your local dealer immediately. Any
shipping damage must be reported to the carrier. Save the packing container, if possible, for
future use when returning the viscometer to Brookfield or an authorized dealer for service.
Head
Serial Tag Info
on Back of
Viscometer Head
Handle for Raising
and Lowering
Viscometer Head
Thumb Screw
P/N CAP-85Y
Solvent Trap
P/N C1K-63
The Flat
Cone Spindle
P/N CAP-S-XX
Base
Console
Column
Figure I-1: Components
I.2 Utilities
Input Voltage: 115 VAC or 230 VAC
Input Frequency: 50/60 Hz
Power Consumption: Less than 345 WATTS
Fuses: (2) 5x20mm, 3A, 250V; Fast Acting for 125VAC
(2) 5x20mm, 1.6A, 250V; Fast Acting for 250VAC
Power Cord Color Code:
United States Outside United States
Hot (live) Black Brown
Neutral White Blue
Ground (earth) Green Green/Yellow