Brookfield CAP1000 Viscometer User Manual
Page 29
Brookfield Engineering Labs., Inc.
Page 27
Manual No. M02-32A0607
PACKAGING INSTRUCTIONS TO RETURN A BROOKFIELD CAP VISCOMETER FOR REPAIR OR CALIBRATION
Package the viscometer for shipment as outlined below.
Return the viscometer to the attention of the Repair Department (see address below).
RUSH SERVICE MUST BE INDICATED ON THIS FORM AND CLEARLY
MARKED ON THE OUTSIDE OF YOUR SHIPPING PACKAGE.
R
Remove and return all spindles (properly packed for shipping). DO NOT RETURN WITH THE SPINDLE ATTACHED.
R
Clean excess testing material off the instrument.
R
Include MSDS sheets for all hazardous materials tested with this instrument.
R
If you have shipping foam block, as shown in Figure 1, please use it to support the shaft. If you don't, use a suitable materi al of
similar length.
Foam Insert Used
When Shipping CAP
Viscometer
Figure 1
R
Enclose the instrument in a plastic bag.
R
Pack the instrument in its original case. Cases are available for immediate shipment from Brookfi eld. If the case is not available,
take care to wrap the instrument with enough material to support it. Avoid using foam peanuts or shredded paper.
R
Fill out page 1 of this Laboratory Repair Return Form with as much information as possible to help expedite your service. If you
do not have this form, you can download it from our website: www.brookfi eldengineering.com/support/maintenance
-or -
Email us at CCS@brookfi eldengineering.com
T
EL
508-946-6200 or 800-628-8139 F
AX
508-923-5009
R
Package the instrument and related items in a strong box for shipping. Mark the outside of the box with handling instructions.
Example:
“Handle with Care” or
“Fragile - Delicate Instrument”
“Rush” if appropriate
R
Contact Brookfi eld or our authorized dealer for Return Authorization Number. Mark number on outside of package and on Repair
Return Form.
ISO 9001:2000 CERTIFIED
Tel: 800.628.8139 or 508.946.6200 Fax: 508.946.6262 www.brookfieldengineering.com
Boston •
Chicago • London • Stuttgart • Guangzhou
with offices in:
Brookfield Engineering Laboratories, Inc. • 11 Commerce Boulevard • Middleboro, MA 02346 USA