Blue Sky UCM - Manual (Page 23)

Installation and Operation Manual
22
SPECIFICATIONS
SPECIFICATIONS Universal Communication Module
Power Power provided by charge controller; ≈1W with Ethernet operating
IPN Network Connection RJ-11 Phone jack, 7’ (1.5m) 4-wire swap cable to charge controller supplied
Compatible Charge Controllers All Blue Sky Energy charge controllers with IPN compatible display connector
which may be identified by a lower case “i" in the charge controller part number (e.g., SB3024iL)
RS-485
Fully isolated RS-485 to ±100VDC, common mode transient immunity >25kV/μs
Selectable half duplex (2-wire) or full duplex (4-wire), Connection via compression terminal block
Default communication parameters, 19.2k baud, Even parity (9600 baud & Odd parity available)
Ethernet Standard Ethernet TCP/IP 10Mbps • RJ-45 connector
MODBUS Standard MODBUS RTU, slave addresses 1 – 247 available
Communication via isolated RS-485 or MODBUS/TCP
HTTP Web Site Server Delivers HTTP web site for data view, parameter setup and datalog file download for two users simultaneously.
Requires Internet browser software supporting HTTP 1.1 or higher
Datalogging Provides datalogging of up to 32 key performance parameters for up to 128 days. Datalog available for download as
Comma Separated Value (.csv) file which may be viewed or manipulated with Microsoft ® Excel ® .
FTP Upload
Provides ability to periodically upload real time data via FTP to IP Address or Domain Name
as Comma Separated Value (.csv) file.
Environmental -40 – +50 °C, 10 – 90% RH non-condensing
As a part of our continuous improvement process ¦ With user supplied Internet connection
specifications are subject to change without prior notice. § Requires IPN-ProRemote with software
version V4.00 or greater
TWO YEAR LIMITED WARRANTY
Blue Sky Energy, Inc. (hereinafter BSE), hereby warrants to the original consumer purchaser, that the product or any part thereof shall be free from
defects due to defective workmanship or materials for a period of two (2) years subject to the conditions set forth below.
1. This limited warranty is extended to the original consumer purchaser of the product, and is not extended to any other party.
2. The limited warranty period commences on the date the product is sold to the original consumer purchaser. For high volume OEM customers where it
is not possible to match a product to a purchase date the limited warranty period commences on the manufacturing date of the product. A copy of the
original purchase receipt identifying purchaser and date of purchase, must accompany the product to obtain warranty repairs.
3. This limited warranty does not apply to, and future warranty shall become void, for any product or part thereof damaged by; a) alteration, disassembly
or application of a foreign substance, b) repair or service not rendered by a BSE authorized repair facility, c) accident or abuse, d) corrosion, e)
lightning or other act of God, f) operation or installation contrary to instructions pertaining to the product, or g) cosmetic aging.
4. If BSE’s examination of the product determines that the product is not defective the consumer shall be charged a test and evaluation fee of $20 and be
responsible for all transportation costs and insurance related to returning the product to the consumer. The consumer is ultimately responsible for
proper installation and operation of the product and BSE’s prior troubleshooting assistance shall not serve as a waiver of the test and evaluation fee.
The test and evaluation fee is subject to change without prior notice.
5. If within the coverage of this limited warranty, BSE shall repair or replace the product at BSE’s sole discretion and return the product via standard
ground transportation of BSE’s choosing within the continental US. The consumer shall be responsible for all transportation costs and insurance to
return the product outside the continental US, and for all transportation costs and insurance related to expedited return of the product. BSE’s liability for
any defective product or any part thereof shall be limited to the repair or replacement of the product. BSE shall not be liable for any loss or damage to
person or property, or any other damages, whether incidental, consequential or otherwise, caused by any defect in the product or any part thereof.
6. Any implied warranty for merchantability or fitness for a particular purpose is limited in duration to the length of this warranty.
7. To obtain warranty repairs, contact BSE at 760-597-1642 to obtain a Returned Goods Authorization (RGA) number. Mark the outside of the package
with the RGA number and return the product, postage prepaid and insured to the address below. The consumer is responsible for all transportation
costs and insurance related to returning the product to BSE, and for any shipping damage which may void the warranty or increase the cost of repairs.
Blue Sky Energy, Inc.
2598 Fortune Way, Suite K
Vista, CA, 92081, USA
800-493-7877 • 760-597-1642 • Fax 760-597-1731 • www.blueskyenergyinc.com