AYRE DX-5DSD - Manual (Page 15)

Setup and
Configuration
Once you have connected the Ayre DX-5
DSD
to your
home theater system, you will need to configure it
to ensure compatibility with your display. There is
an extensive set of options as detailed in the chapter
“On-Screen Setup Menu”. To simplify the setup
process, nearly all of the options have been
pre-selected at the factory. However, a few settings
may need to be changed to match your system.
Video Setup
With the DX-5 DSD connected to your video display
and powered on, press the “Setup” button on the
remote control handset (just above the “Red”
button). This will access the On-Screen Setup Menu.
Use the “Up/Down” arrow buttons to navigate to
the
Video Setup menu item. Press the “Enter”
button to select the menu items and then once again
use the “Up/Down” arrow buttons to select the
desired option.
13