AYRE DX-5DSD - Manual (Page 105)

Initial Wizard
The Initial Wizard only appears after the “Reset
Factory Defaults” menu setting has been run. It is
useful for selecting a few of the basic settings, but
many other On-Screen Menu Settings will have to
be changed manually.
Primary video output [ HDMI | Component ]
(HDMI is the only video output on the Ayre DX-5
DSD .
Selecting “Component” will result in no picture.)
Output Resolution [ Auto | 1080p | 1080i | 720p |
480p/576p | 480i/576i | Source Direct ]
(Select the proper output for your display as explained on
page 70.)
Aspect Ratio [ 4:3 Letterbox | 4:3 Pan & Scan | 16:9 Wide |
16:9 Wide/Auto ]
(“4:3 Letterbox” is the correct setting for a standard 4:3
display. “16:9 Wide/Auto” is the correct setting for a
widescreen 16:9 display.)
Audio Setting [ Compatible | Advanced ]
Playback Setup
SACD Priority [ Multi-Channel | Stereo | CD Mode ]
(Select “Multi-Channel” to use the HDMI Audio Output with
a surround-sound system. Select “Stereo” to use the Analog
Audio Outputs with a two-channel system.)
DVD-Audio Mode [ DVD-Audio | DVD-Video ]
Auto Play Mode [ On | Off ]
(This applies only to audio discs.)
PBC [ On | Off ] (This applies only to old VCD/SVCD discs.)
103