Device setup – AYRE DX-5DSD User Manual
Page 110

Dynamic Range Control [ Auto | On | Off ]
Device Setup
Firmware Information
Firmware Upgrade
Firmware Notification [ On | Off ]
Remote Control Code [ Code 1 | Code 2 | Code 3 |
Alt. Code ]
(”Remote Control Code” is not changed by “Reset Factory
Default”.)
HDMI CEC [ On | Limited | Off ]
Dimmer Control [ On | Dim | Off ]
Persistent Storage
Storage Device [ Internal Flash | USB Drive ]
Total Space
Available Space
Erase BD-Video Data
Reset Factory Default
(Warning! Using the “Reset Factory Default” will result in the
“Speaker Configuration” being set to the incorrect values. If
the “Reset Factory Default” is used, the “Speaker
Configuration” settings must be restored to their correct
values for the HDMI Audio Output and LFE Mixdown mode
to operate properly.)
108