Aviom A360 - Manual (Page 44)

35 A360 P ersonAl
M
ixer
U
ser
G
Uide
Master Volume determines the mix level available to the Mono Mix Out.
The A360 automatically generates a mono mix regardless of any stereo placement and/or panning used
in the stereo mix heard at the S
tereo
m
Ix
o
ut
jacks. The Mono Mix Out level is not saved as part of a Mix
Preset.
Bass Tone Control
The master section’s B
ASS
tone control adds or subtracts low frequencies from the mono and stereo mix
outputs. It is designed as overall tone compensation for the headphones, earbuds, or speaker systems
connected to the A360 Personal Mixer.
The default setting for the Bass tone control is at 12 o’clock (flat). The Bass tone control’s position is not
saved as part of a Mix Preset.
Treble Tone Control
Use the t
reBle
tone control to add or subtract high frequencies from the mono and stereo mix outputs.
The default setting for the Treble tone control is at 12 o’clock (flat). Like the Bass tone control, the Treble
tone control’s position is not saved with a Mix Preset.
Enhance Tone Control
The e
NhANCe
control is a specially developed bass and treble EQ curve designed to increase low-end punch
and high-end brilliance in a mix. It is especially useful for performers listening through in-ear monitors.
The default position for the Enhance control is fully left—off. To use the Enhance control, start by creating
a mix with the control in the full off (counterclockwise) position. Then start raising the e
NhANCe
knob slowly
while listening to the mix until you find an amount that’s pleasing.