360 Systems DigiCart/EX - Manual (Page 24)

UTILITY B UTTON
The
UTILITY
button is used to access functions such as Hot Key assignments, copy, rename, delete,
and disk format operations. Use the selection knob to select a particular Utility function. Utility
options are displayed alphabetically in a rotating list. Press the
ENTER
button to initiate the chosen
function. Press
UTILITY
or
EXIT
to exit the utility menu.
Your last menu selection is stored in temporary memory. For example, if you need to repeat a copy
operation, that option will be displayed first upon subsequent presses of the
UTILITY
button. After
recording, the Rename utility is pre-selected. The button illuminates while in Utility mode.
EDIT B UTTON
The
EDIT
button is used to access non-destructive editing functions such as head and tail trims, and
fades. It is also used to edit a playlist. Rotate the selection knob to view options.
Your last menu selection is stored in temporary memory. For example, if you need to repeat a fade-
in operation, that option will be displayed first upon subsequent presses of the
EDIT
button.
RECORD B UTTON
When the
RECORD
button is pressed:
The Input Monitor function will turn on,. the LED meters will be active and the
RECORD
button
will illuminate.
Pressing the
PLAY
button will initiate recording and illuminate the
PLAY
button. If a RECORD
THRESHOLD level is set, recording will actually begin when the audio level exceeds the
threshold level setting.
Audio will be recorded at the sampling rate and recording format currently selected in the SETUP
MENU. If using digital inputs, the sampling rate will be automatically set at the sampling rate of the
incoming signal, unless Sample Rate Conversion is selected.
PLAY B UTTON
Press the
PLAY
button to initiate playback of a cut or Playlist. Play has precedence over other
machine functions and will cancel Setup, Utility, or Edit menus and begin to play the currently
selected cut or playlist.
Subsequent presses of the
PLAY
button will cause the next selection to play immediately or on
completion of the current one, dependent on the RESTART MODE.
A blinking
PLAY
button indicates another cut is ready for Follow-On play or that Loop mode is
active.
A steadily illuminated
PLAY
button indicates DigiCart/EX will stop after the current cut.
STOP B UTTON
Press the
STOP
button to terminate playback or recording. When DigiCart/EX’s “virtual tape
transport” is stopped, the button will be illuminated.
During Follow-on play, or playing a Playlist or loop; pressing
STOP
will end playback upon
completion of the present cut. Press
STOP
a second time to stop the current cut and delete the
Follow-on play list.
When DigiCart/EX is not playing a file,
STOP
may be pressed to display information about [INFO] the
current drive number, name, and the available recording time remaining on the drive (based on the
currently selected recording format).
12
• 24BControl Panel