Canon DC 100 - Manual (Page 64)

64
Recording to a VCR
You can copy your recordings by connecting the camcorder to a VCR or a digital video
device. For a connection diagram showing how to connect the camcorder to a VCR see
the previous section
Playing Back on a TV Screen ( 62).
To change the operating mode, refer to About the Operating Modes ( 9).
1. Connected device: Load a blank cassette and set the device to record
pause mode.
2. This camcorder: Locate the scene you wish to copy and pause
playback shortly before the scene.
3. This camcorder: Resume the movie playback.
4. Connected device: Begin recording when the scene you wish to copy
appears. Stop recording when copying is complete.
5. This camcorder: Stop playback.
 We recommend powering the camcorder using the compact power adapter.
 By default, the on-screen displays will be embedded in the output video signal,
but you can select to turn off the screen displays or select the data that will be
displayed instead (
30).