Canon DC 100 - Manual (Page 29)

29
B
a
s
ic Fu
nc
ti
o
n
s
Pla
y
b
a
c
k
E
Image Jump Function
You can also quickly locate a specific image without having to browse all of them one by
one.
Push the multi selector ( ) and keep it pressed down.
Image numbers will quickly run in sequence. When you release the multi selector the
image corresponding to the number selected will be displayed.
Magnifying the Image
During playback, still images can be magnified up to 5 times.
To change the operating mode, refer to About the Operating Modes ( 9).
1. Move the zoom lever toward
T.
• The image is magnified by 2 times and a frame appears indicating the position of the
magnified area.
• To further enlarge the image, move the zoom lever toward
T. To reduce the
magnification to less than 2 times, move the zoom lever toward
W.
• will appear for images that cannot be enlarged.
2. Select the part of the image to be magnified with the multi selector.
• Move ( , ) the frame to the part of the image you want to see enlarged.
• To cancel the magnification, move the zoom lever toward
W until the frame
disappears.
Zoom lever
Multi selector