Cradlepoint WIPIPE MBR1000 User Manual

Page 29

CradlePoint MBR1000 | USER MANUAL Firmware ver. 1.6.9

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 27

4.5.3

Dynamic (DHCP) Internet Connection Type.

You will not need to complete this section unless your ISP requires
you to.

Host Name. Enter the host name provided to you by your ISP.

Use Unicasting.

Select the check box if advised to so by your ISP.

MTU.

Enter the MTU provided to you by your ISP (default: 1500).

MAC Address.

To input the MAC address of your system, enter it

manually or connect to the MBR1000

‟s Web-Management interface

from the system and click the

Clone Your PC’s MAC Address

button.

4.5.4

DNS Settings

Use the WAN Configuration sub-menu to configure the network
settings for the Wired and Cellular Modem WAN (the first connected
cellular handset or modem).

DNS Address. Select the Get Automatically from ISP/Cellular
Provider

radio button to acquire a DNS Address automatically from

our ISP/Cellular Provider or select the Use the Following DNS
Servers

radio button to specify DNS Servers. NOTE: You would

specify DNS Servers if you want Wi-Fi clients to access DNS
servers that you use for customized addressing or if you have a
local DNS server on your network.

Primary DNS Server. If you choose to use specify your DNS
Servers, then enter the IP address of the server you want as your Primary DNS Server in this field.

Secondary DNS Server. If you choose to use specify your DNS Servers, then enter the IP address of the server you want as your Secondary
DNS Server in this field.