Cradlepoint WIPIPE MBR1000 - Manual (Page 114)

CradlePoint MBR1000 | USER MANUAL Firmware ver. 1.6.9
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 112
8.6 Wireless (Wi-Fi)
The Wireless (Wi-Fi) sub-menu displays the number of wireless
clients that are connected to the router, the MAC address of each
system connecting wirelessly, and the IP address of each system
connecting wirelessly. Control buttons allow the administrator to
allow or deny access for each of the listed computers. If Require
User Login
has not been enabled ( Basic → Wizard sub-menu),
then the control buttons are not available on this submenu.
8.6.1 Number of Wireless Clients
This lists the client computers that are currently connected to the
WLAN access point.
MAC Address. The Ethernet ID (MAC address) of the wireless
client.
IP Address. The LAN-side IP address of the client.
Mode. The transmission standard being used by the client. Values
are 802.11a, 802.11b, 802.11g, or 802.11n.
Rate. The actual transmission rate of the client in megabits per
second.
Signal. This is a relative measure of signal quality. The value is
expressed as a percentage of theoretical best quality. Signal quality
can be reduced by distance, by interference from other radio-
frequency sources (such as cordless telephones or neighboring
wireless networks), and by obstacles between the router and the
wireless device.
If Require User Login is enabled then you can also control internet
access privileges for the attached wireless clients.
(continued)