Cradlepoint WIPIPE MBR1000 - Manual (Page 10)

CradlePoint MBR1000 | USER MANUAL Firmware ver. 1.6.9
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 8
3 QUICK START
3.1 Wireless Setup Using a Mobile Broadband (cellular)
Data Modem/s 1
 Connect the Power Supply

Insert your ExpressCard and/or USB modem/s.

Establish a wireless internet connection as shown below.
3.2 Wired Connection Using Cable/DSL Internet Service
 Connect the Power Supply

Insert one end of your Ethernet cable to the WAN port.
 Insert the other end of the Ethernet cable into your Cable or DSL modem.
It may take a minute or two for the MBR1000 to initialize.
 Open your web browser.
You can now access the Internet.
For Failover/Failback Functionality, you must have an Active Data
Modem attached to the MBR1000.
CradlePoint recommends that Wi-Fi security be setup at this
point. See Setting Up Wireless Network Security
1 Data Modem Not Included. This Product Requires an Activated Data Modem or Phone with Data Plan for Full Functionality. See you Cellular/3G/4G Service Provider for Details
on Coverage and Data Plan Options