Memory/search lock button, I» qd – Panasonic NV-H65 Series User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

a
© 0 0 0
£1 is
ED ■ --
£=:? a
=>=>0
\ ^
c3ca=3J=i
d
o a
\
Memory/Search Lock Button
When this button is pressed once, the Memory Indicator
“M” will light up, and when it is pressed one more time, the
Search Lock Indicator “S" wilt appear instead. When it is
pressed a third time the Search Lock Indicator "S” will
disappear.
Memory/Search Lock Button
FIX
Hi-Fi TRACKING
ON<
OFF'
SOFT SHARP
TRACKING SLOW TRACKING PICTURE
AUDIO SELECT
REW/©-
PLAY-
-O/FF
STOP
EDIT
AUDIO LEVEL
/IPX FILTER
REC«
I------1
MEMORY RESET
CZ^EZZ]
PAUSE/STILL
SEARCH LOCK
1
®
>
©I»
QD
When the Fast Forward ►►/Cue © Button is kept pressed
while the VTR is in the playback mode, the tape will be
played back in forward direction at about 5 times norma!
playback speed.
0/FF
t»
Press the Stop Button (R) to stop the playback.
When the Rewind ◄■^/Review Q Button is kept pressed
while the VTR is in the playback mode, the tape will be
played back in reverse direction at about 5 times normal
playback speed.
REW/©
To make possible Cue or Review playback without having then press the Fast Forward ►►/Cue Button Q or the Rewind -^◄/Review (© Button. Button (►). •When Cue or Review playback continues for more than 10 minutes, the VTR switches back to the norma! playback •The sound will be played back only during normal playback. •If you leave the VTR in the still playback mode for more than 5 minutes, the VTR will automatically switch over to the Stop mode, to protect the tape •Noise which takes the form of horizontal bars appears on the TV in the Cue and Review playback •The top of the picture may become distorted in the Cue or Review mode. This is not an indication of a malfunction. •When the picture rolls vertically in the Cue or Review mode, adjust the vertical hold control on the TV set. 16
to keep the respective button pressed, first press the
Memory/Search Lock Button so that the Search Lock
Indicator “S” appears in the Multi-Function Display, and
To switch the VTR back to normal playback, press the Play
mode.
and the video heads.
modes. This is not an indication of a malfunction.