Fax only mode, All calls are received as faxes), Setting up the unit for fax reception – Panasonic kx-fmc230 User Manual
Page 59: Setting the fax only mode ring count
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Receiving Faxes
FAX ONLY mode
(all calls are received as faxes)
Setting up the unit for fax reception
Turn on the AUTO RECEIVE mode by pressing
fAUTO RECEIVE] until the FAX indicator light goes on.
•The display shows the following message.
Display:
FAX ONLY MODE
•The unit will automatically answer all calls and only
receive fax documents.
•The number of rings before a call is answered can be
changed. See below.
Setting the FAX ONLY mode ring count
This feature determines the number of rings before the unit answers a call in the FAX ONLY mode.
You can choose from 1 to 4 rings.
Helpful hints:
•To answer a call before the unit does, increase the number of rings.
• If you find receiving faxes from machines with the automatic transmission feature difficult, decrease the
number of rings.
1
2
3
4
5
6
Press [MENU],
Display:
Press then [^.
SYSTEM SET UP
FAX RING
Press [START/COPY/SET].
RING=2
▼ A
Press @ or @ to select the desired number.
Press [START/COPY/SET].
SETUP ITEM [
]
Press [MENU],
59