Sending documents from memory, Setting memory transmission 1 2, Transmitting documents from memory – Panasonic kx-fmc230 User Manual
Page 52: Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Sending Faxes
Sending documents from memory
The unit is able to scan and store documents into memory, and then transmit the stored documents.
The memory capacity is approx. 25 pages, based on the CCITT No. 1 test chart in standard resolution. For the
CCITT No. 1 test chart, see page 124.
SYSTEM SET UP
Setting memory transmission
1
2
3
4
Press
[MENU],
Display:
Press then (T] [^.
MEMORY XMT
Press
[START/COPY/SET],
MODE-OFF [ Y A ]
Press @ or @ to select “ON”.
MODE=ON [ ▼
A ]
5
6
• If this feature is not required, select “OFF”.
Press f
START/COPY/SET].
Press
[MENU].
SETUP ITEM [
]
Transmitting documents from memory
Insert the documents FACE DOWN.
1
2
Enter the telephone number by using regular
dialing, one-touch dialing, speed dialing or the
electronic telephone directory.
When using regular dialing, press
iSTART/COPY/SETl.
•The documents will be fed into the unit and
scanned into memory.
After storing all of the pages, the unit will transmit
the documents.
•The amount of memory used will be shown as a
percentage on the display.
Display:
PAGES=0X
¿5
Amount of memory used
Note:
•The stored documents will be automatically erased after transmission.
•To cancei the memory transmission, press
[STOP]
during or after scanning the documents.
• If you select the fine, super fine or halftone resolution, the number of documents that can be sent will be
decreased.
• If the stored documents exceed the memory capacity, the transmission will be canceled.
52