Checking how much film you have left, Replacing the film or film cartridge, Caution – Panasonic kx-fmc230 User Manual
Page 110: Ink film
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Ink Film
Checking how much film you have left
To check the amount of remaining film, press [FILM REMAININGl while the unit is idle. The display indicates
the approximate amount of remaining film.
When the film indicator points to this position, the remaining film will print up to
25 pages of letter size documents. Prepare a new film or film cartridge for
replacement.
Replacing the film or film cartridge
When the unit detects the end of the film, one of the following messages will be displayed.
FILM NEAR EMPTY
FILM EMPTY
The remaining film prints approx. 15 letter size documents. Prepare a new film or
film cartridge.
The film is empty. Install a new film or film cartridge.
To order replacement parts, see page 7.
1
2
Slide the front cover open lever forward to unlock
the front cover and lift to open.
Remove the film cartridge.
• If you have purchased a film cartridge (Model no.
KX-FA135) for replacement, skip to step 9.
•To replace only the film, go to step 3.
Unlock the four gears by ((
a
)) pulling the top side
gears (blue and green gears) forward and
((
b
))
pushing back the bottom side gears (green gears).
Remove the used film.
Remove the four gears from the used film cores.
Caution:
•The film is not reusable. You can order a new
film for replacement through your nearest
Panasonic dealer or call 1-800-332-5368.
Film cartridge
Front cover
open lever
Top side gears
Green gear
Bottom side gears
Green gear
110
For Assistance, Call 1-800-435-7329