Storing telephone numbers in the main unit, One-touch dialing, For upper stations (1-9) – Panasonic kx-fmc230 User Manual
Page 37: For lower stations (10-18), Speed dialing, Press [start/copy/setl, Press [start/copy/set, Helpful hint, To keep the phone number secret, To erase a stored number and station name
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Dialing
Storing telephone numbers in the main unit
The main unit’s memory allows you to use both one-touch dialing and speed dialing for rapid access to your
most frequently dialed numbers.
One-touch dialing: 18 stations (Each of the 9 direct station keys is divided into an upper station and a lower
station).
Speed dialing:
100 additional dialing stations. These stations are assigned to 2-digit numbers (00-99).
1
2
4
5
6
Press [MENU] three times.
Display:
STORE TEL NO.
One-touch dialing:
For upper stations (1-9)
Press one of the direct call station keys.
For lower stations (10-18)
Press [LOWER], then press one of the direct
call station keys.
OR
■ Speed dialing:
Press (^, then press the desired 2-digit
number (00-99).
Enter the telephone number up to 30 digits in
length.
•To enter a hyphen in a telephone number, press
[HYPHEN] (direct call station 8).
Press [START/COPY/SETl.
NAME=
Enter the station name, up to 10 characters, by
following the instructions on page 24.
Press [START/COPY/SET].
STORE TEL NO.
•To program other stations, repeat steps 2 to 6.
Press [STOP].
Helpful hint:
•To confirm stored telephone numbers and station
names, print a telephone number list (see page 119).
Direct call
stations
Speed dial
stations [MENU]
®
©CD
©®©
©©©
L _ _ J
o
-- 1
[stop
[START/COPY/SEf]
[HYPHEN]
To keep the phone number
secret
Press [SECRET] (direct call station 3) after
entering the telephone number.
•The telephone number will not appear on the
display and the telephone number list.
•[SECRET] is not counted as a digit.
To erase a stored number and
station name
Press (STOP) in step 3 to erase the telephone
number. Press [ STOP ] in step 5 to erase the
name.
Then press [START/COPY/SETl
37