Setting the dialing mode (touch tone or pulse), Setting the dialing mode, Touch tone or pulse) – Panasonic kx-fmc230 User Manual

Page 42

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Diaiing

Press (MENU).

Display:

Press then Q [ z ] .

SYSTEM SET UP

DIALING MODE

Press ( START/COPY/SET].

MODE^AUTO [ ▼

A ]

Press @ or (A) to select the desired setting.

Press [START/COPY/SETl.

SETUP ITEM [

]

Press [MENU],

Setting the dialing mode

(touch tone or pulse)

The unit will automatically set the dialing mode to TONE or PULSE when the unit is turned on if this feature is

set to AUTO.

If you cannot dial, change the dialing mode setting to TONE or PULSE by following the instructions below.

4
5

Note:

•If you change to a different telephone company and

this company has a different dialing mode service,

reset your dialing mode.