Panasonic kx-fmc230 - Manual (Page 100)

Operations
When a function does not work, check here before
requesting help (cont.)
Fax reception
PROBLEM CAUSE & REMEDY
I cannot receive documents. •The telephone line cord from the single telephone line is connected
to the EXT jack on the unit. Connect to the LINE jack.
I cannot receive documents
automatically.
•The receive mode is set to the TEL mode. Set to the TEL/FAX,
FAX ONLY or EXT.TAM mode.
•The time to answer the call may be too long. Decrease the number
of rings {see pages 59 and 65).
The recording image is faint. •The sender transmitted a faint document. Ask them to transmit a
clearer copy of the document.
•The thermal head is dirty. Please clean it (see page 114).
The printing quality is poor. • Some paper has instructions recommending which side to print on.
Try turning over paper. We recommend smooth paper such as
Hammermill® jet PRINT for clearer printing.
A blank sheet is ejected after the
received documents are printed out.
•The receiving reduction rate is not programmed correctly. Program
the proper reduction rate (see page 72).
Copying
PROBLEM CAUSE & REMEDY
A dirty pattern or a black line
appears on the copied documents. •The glass or rollers are dirty. Please clean them (see page 114).
The copied image is distorted. •The thermal head is dirty. Please clean it (see page 114).
The document is not copied
properly.
•The film is not inserted correctly. Insert it correctly (see pages 110
and 111).
The copied document is blank. •The film is not inserted correctly. Insert it correctly (see pages 110
and 111).
The printing quality is poor. • Some paper has instructions recommending which side to print on.
Try turning over paper. We recommend smooth paper such as
Hammermill® jet PRINT for clearer printing.
A paper jam occurs during copying. •The film is not inserted correctly. Insert it correctly (see pages 110
and 111).
100 For Assistance, Call 1-800-435-7329