Connect all leads, Final installation, Final checks – Panasonic CY VMX6800U User Manual

Page 28: Umx6800u, Continued) □ connect all leads

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Ш Ш 1М

(continued)

□ Connect All Leads

Now that you have identified all the wires in the car,

you’re ready to begin connecting them to the con
troller unit wires. The wiring diagram page 29)

shows the proper connections and color coding of

the leads.
We strongly recommend that you test the unit

before making a final installation.

You can set the unit on the floor and make tempo

rary connections to test the unit. Use electrical tape

to coverall exposed wires.

Important:

o Connect the red power lead last, after you

have made and insulated all other connec

tions.

Ground

Connect the black ground lead of the power connec

tor to the metal car chassis.

Power

Connect the red power lead to the correct car radio

wire or to the appropriate fuse port on the fuse

block.

If the LCD monitor functions properly with all these

connections made, disconnect the wires and pro
ceed to the final installation.

□ Final Installation

Lead Connections

Connect all wires, making sure that each connection
is insulated and secure. Bundle all loose wires and

fasten them with tape so they won’t fall down later.

Congratulations! After making a few final checks,

you are ready to enjoy your new auto LCD monitor.

□ Final Checks

1. Make sure that all wires are properly connected

and insulated.

2. Turn on the ignition to check the unit for proper

operation,

If you have difficulties, consult your nearest autho
rized professional installer for assistance.

UMX6800U