Panasonic CY VMX6800U - Manual (Page 19)

Audio/video input terminal 2 (VTR2-IN)-------------
Used to connect a game player or other device,
pages 30,31)
Video (Yellow)
L (White)
R(Red)
VTR input switch
(VTR1 orVTR2)
Used to select the VTR
input selection.
{«=> page 21)
Infrared transmitter-----------
Used to transmit audio
phones. (=> page 17)
Room light switch
DOOR: Room light is on
when door is
opened.
OFF: Room light is off.
ON: Room light is on.
Room light, Room light lens
Select buttons ( a , v )
Used to move the cursor.
VTR2 1 Г VTR1
0 0 O o o
to wireless head-
OFF DOOR ON
pages 22-25)
Menu button (MENU)
Used to determine the various settings,
{o pages 22-25)
Mode button (MODE)
Used to select the dimmer mode.
(=> pages 22, 23)
Power button (POWER)
Used to turn the power ON and OFF.
{» page 21)
Notes:
о When RCA cords have been connected to this
unit, secure them along the roof panel of the car
so that they will not dangle down or become eas­
ily disconnected.
о Take care to ensure that the RCA cords will not
become wrapped around your hands or neck
since this may cause an accident.
g
GO
®
b
0
©
CO
6
Notes:
o Make sure that the infrared transmitter is not
covered by hands or hair,
o
Refrain from adhering stickers, etc.
Notes:
o If you exchange the bulbs or encounter prob­
lems with the room lights, please consult your
nearest professional installer.
o Purchase 12 V, 5 W bulbs if bulbs other than the
ones supplied are to be used.
If bulb is in need of replacement:
1. Turn the power off.
2. Open the room light lens with a small flat blade
screw driver.
3. Remove old bulbs and replace with bulbs.
4. Reassemble lens covers.
5. Verify function of room lights by turning the
power on.
19