Panasonic NV-F65EA - Manual (Page 39)

AUDIO IN VIDEO IN
Preparation
•Connect the Video Camera via the Camera AC Adaptor to
the VTR as shown in the illustration above.
•Set the Input Signal Selector to “Line/Audio”.
• Insert a video cassette with the erasure prevention tab
intact.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
•Adjust the audio recording level as described on page 24.
•Set the Tape Speed Selector to “SP" or “LP”.
^ Turn the Camera AC Adaptor on and make the
necessary adjustments on the camera.
Refer to the operating instructions of the camera you
are using.
^ Press the Record Button (•) on the VTR to start
recording.
Avoid recording unwanted material:
Press the Pause/StitI Button (II) of the VTR, and the
recording will stop temporarily. To restart recording, press
the Pause/Still Button (I I), again.
0 Press the Stop Button (■) on the VTR to stop the
recording.
( 39 )