Panasonic NV-F65EA - Manual (Page 14)

SETTING THE TUNER IN THE VTR (GONr D)
O Press the Preset/Fine/Normal Button.
@ Press the Channel Up or Down Button to select a
programme position (channel) which you do not want
to tune to a TV station.
o Press the Clear Button (“—” will be displayed in the
Programme Position Indication),
/ ~ “ - ■ ■
• Repeat steps @ and Q for any programme positions
on which no stations are to be tuned. Afterwards,
these programme positions will be skipped during
Up/Down selection of the programme position.
O Press the Preset/Fine/Normal Button twice.
C^anp^liingi the Clear Funqtibnf (Blanktn0)
(T) Press the Preset/Fine/Normal Sutton.
To cancel the blanking of a programme position, select
that programme position on the VTR and then press
the Clear Button.
@ Press the Preset/Fine/Normal Button twice.
Fine tu itihg Procedure
If fine tuning is necessary, for example for a weak station
which is close to a strong station;
1. Press the Preset/Fine/Normal Button twice.
r
I r A
V ^
= ■ '"■* * ' ;... J
2. Press the “+” or
condition.
Button to obtain the best tuning
~ i i;:; ~ "
_ J
•“AFC” Indicator will not be displayed.
•To return the tuning to its former state, press the
Band/AFC Button.
3. Press the Preset/Fine/Normal Button.
How to Select the Programme Position (Channel)
If more than 5 seconds pass between the first, second and
third push, the channel will not be changed normally.
□ m a
□ s B
□ H B
H B
select channel press button
1-9
10
20
11-99
for example 32
E3-H
respective channel
E]-*IZI-*[I]
E]-»II3-^[I]
p1-»fT|->[T|
( 14 )